Sign In | Join Free | My fazendomedia.com
China Guang Xi Baisheng Light Metal Material Co.Ltd logo
Guang Xi Baisheng Light Metal Material Co.Ltd
Guang Xi Bai Sheng Light Metal Material Co.Ltd Aluminium semi-products leading manufacturer and distributor in china
Active Member

5 Years

Home > Rolled Aluminium Sheet >

Aluminium household foils, AA1235/8011/0, THICKNESS 0.03MM-0.13MM

Guang Xi Baisheng Light Metal Material Co.Ltd

Aluminium household foils, AA1235/8011/0, THICKNESS 0.03MM-0.13MM

  • 1
  • 2
  • 3

Brand Name : GBS

Model Number : GBS-JYB

Certification : ISO

Place of Origin : CHIAN

MOQ : 5mts

Payment Terms : L/C, D/A, T/T

Alloy : AA1235/8011

TEMPER : O

Thickness : 0.03-0.13mm

width : 40-1600mm

surface : one side bright one side dull

Contact Now

ALUMINIUM HOUSEHOLD FOILS

1. PURPOSE

To establish definitive quality standards on foil rolls, thereby minimizing claims attributable to any lack of understanding between supplier and customer.

2. OBJECTIVE

This specification covers 8011 or 1235 alloy foil master rolls for household foil and describes the quality attributes of the master foil rolls. The roll can be cut into small rolls and be used to pack and freshen the household food.

Aluminium household foils, AA1235/8011/0, THICKNESS 0.03MM-0.13MM

3. PHYSICAL REQUIREMENTS

3.1 ALLOY AND TEMPER

Alloy and temper should correspond to Table 1.

Table 1

Alloy Temper
8011 O
1235 O

3.2 SPECIFICATION AND TOLERANCE

The specification is as below Table 2.

Table 2

Gauge mm

Gauge Tolerance

mm

Width mm

Width Tolerance

mm

ID

mm

OD

mm

0.010~0.050 ±5% 40~ 1600 ±1 Æ 76.2 600max to ID 76.2
Æ 150 900max to ID 150 & 152
Æ 152

3.3 CHEMICAL COMPOSITION

The chemical composition should correspond to Table 3.

Table 3

Alloy

Chemical Composition

%

Si

Fe

Cu

Mn

Mg

Zn

Ti

Other

Al

Single

Total

up

8011 0.58~0.66 0.63~0.85 0.05 0.03 0.03 0.10 0.02~0.04 0.05 0.15 Remainder
1235 0.12~0.16 0.45~0.52 0.02 0.01 0.01 0.01 0.02 0.03 >99.35

3.4 MECHANICAL PROPERTIES

Mechanical properties should correspond to Table 4.

Table 4

Alloy-Temper

Gauge mm

Tensile Strength Mpa

Elongation %

8011/1235-O

0.010-0.025 80-110 ≥1.5
0.025-0.05 80-110 ≥2.5

3.5 SURFACE CONDITION

3.5.1 The surface shall be cleaned and free from inclusions, scratches, wrinkles, cracks, overlapping or other internal defects.

3.5.2 There will be no adhesion or tearing when the roll is unfolded, and the free uncoiling length should be 1.5m max.

3.5.3 One side is bright, the other side is dull. The bright surface is usually at the outer side of the roll, and the dull surface is at the inner side of the roll.

3.5.4 Pin-holes

The pin-holes should correspond to Table 5.

Table 5

Gauge 0.010~0.012 >0.012~0.015 >0.015~0.020 >0.020
Pinholes/m2(max) 100 50 20 0
Note: When the customer has special requirement, it has to be negotiated with supplier and demander.

3.5.5 Spice

The splices are as below Table 6.

Table 6

Roll Diameter,mm Splices
≤400 ≤1
>400 ≤2

a) All splices to be ultrasonic/tape.

b) It is allowed one splice per roll. (Max. once per 2000m)

c) Marked at the roll edge with a film, placed close to the splice.

3.5.6 Wettability

The wettability corresponds to A grade quality.

4. PACKINGAND SHIPPING REQUIREMENTS

Aluminium household foils, AA1235/8011/0, THICKNESS 0.03MM-0.13MM

4.1 Quantities – As specified on the purchase order with a tolerance of +/- 10% unless otherwise stated on the order.

4.2 Packaging – Foil rolls are to be packed in collapsible aluminum racks or steel racks as specified in such a manner that normal handling by common carrier will ensure safe transportation without damage to the foil. This includes wrapping to protect the foil from water stain and corrosion.

4.3 Identification – Each roll shall be identified with the following:

a) Order number (release number)

b) Part number (from RMC Purchase Order)

c) Gauge (mm)

d) Width (mm)

e) Net weight (kg)


Best Aluminium household foils, AA1235/8011/0, THICKNESS 0.03MM-0.13MM wholesale

Aluminium household foils, AA1235/8011/0, THICKNESS 0.03MM-0.13MM Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Guang Xi Baisheng Light Metal Material Co.Ltd
*Subject:
*Message:
Characters Remaining: (0/3000)